Fairfax Fall Festival

Our booth location on a street corner

 Last weekend, Jeff Fleisher and I set up a booth at the Fall Festival held in downtown Fairfax, Virginia.  Jeff had a 10X10 foot tent and we each purchased five-foot tables to show our wares. We had what we judged to be a good location--a street corner close to the food vendors.  We had prepared well in advance.  I made large signs featuring our business names and our work, which you can see hanging at the rear of the tent.

Jeff was offering platters, a few bowls, some jewelry boxes--including one with chip carving on the lid--and some small book or CD racks.  I displayed about 50 pens, some business card holders in cherry and walnut, and small desk clocks in the same woods.

Closeup of our booth

It was a beautiful day and the crowds were large and continuous.  But soon we noticed that people were carrying food but few shopping bags, which showed that they were out for a nice day but were not buying much.  That was certainly the case at our tent.  I sold only two clocks, one pen and one business card holder.  Jeff sold only one bowl.  I don't think we made enough money to pay for our booth location.

We concluded that we would not do this show again.  It is fine for folks to have a nice outing, but there isn't much of an incentive to buy things.  We are hoping that our next show--a two-day show in November--will be a better one.  It is billed as a Holiday Crafts Festival so it may draw a better crowd.  And, with the holiday gift-giving season approaching, perhaps attendees will be in a better buying mood.

Norm

Turning Pens and Making Small Crafts

My friend Jeff Fleisher and I signed up to sell our wares at two craft shows this fall.  Both are at the Fairfax County (Virginia) Government Center.  Ever since I completed the Winchester desk class in July and a subsequent vacation, I have been almost totally occupied with turning pens.  That will be, for the most part, what I'll be selling.

I decided to concentrate on turning wood rather than acrylic.  So to make them better than ho-hum, I've been working with burls--especially elder but also buckeye--which give the pens a more distinguished look.  I've got a pretty good stock of pens that will retail in a range from inexpensive to expensive.

But after more than a month of turning pens, I'm getting worn out and so have turned to making business card holders and small clocks.  The business card holders are surprisingly easy to make.  You take an approximately 2X2 board (I used cherry and walnut) and cut out the inside with a dado blade, making several passes until I got the right depth.  Then I took the length of wood to the router table and routed a shallow groove 1/4 inch wide in the face.  I glued a strip of 1/4 inch patterned inlay into the groove, then sanded the boards before cutting them into 3 inch lengths.  They look pretty good!

The clocks are only just started.  Guess I'd better get busy!

Norm

My SawStop Stopped!

A couple weeks ago I was ripping some sycamore to make frames for earring holders when my SawStop refused to cut. I had lightly touched the blade with the end of the board I planned to rip when the saw stopped running. After that, each time I tried to fire it up, it would start, then immediately stop.

I contacted the service department at SawStop and got a fast reply from Roger and Tom, who helped me diagnose the problem. The fix is to send me a new and upgraded control box and cable, which they can do since my saw is still under warranty. In addition, they asked me to send in my brake cartridges, the ones that keep the saw from cutting off my fingers, so their software could be updated to the latest version. These changes, we hope, will take care of the problem.

But I haven't been able to implement the fixes yet. The problem is not on SawStop's end; they responded quickly. It is due to Mother Nature, who dumped 35+ inches of snow on us two weeks ago, most of which is still on the ground and seriously impeding UPS deliveries in our area. The package with the control box has been on the truck, "out for delivery," several days this week but UPS has refused to leave it on the snow bank by the side of the road and each day it has gone back to the warehouse undelivered. I don't know how long this will go on; the prospects for this much snow melting anytime soon do not seem very good.

So for now, I'll just have to be content with other woodworking jobs that don't require my table saw, jobs like turning pens on my lathe, hand planing wood for cutting boards, cutting the boards to shape on the band saw and installing the vises that have been hanging around the shop for all too many months.

Norm

Starting Out With a Lathe

Late last year, I got turned on to the possibilities of making bowls on a lathe. I did some investigation and decided that the Nova 1624-44 would be the right one for me. It's not a variable speed lathe so it requires moving the belt to change speeds. But that cut about $500 off the cost. It has a reasonably long bed that can be extended another 24 inches with an optional bed extension. The headstock rotates so it is possible to turn bowls as large as 29 inches in diameter, much larger than I'm likely to be turning. Nova is a New Zealand company and is well-respected. All-in-all, then, my new lathe is a multi-purpose machine that should serve me well for many years.

As the above photo shows, there are already a lot of chips on the machine. I started out not with bowls with pens, which is, I think, a good way to begin learning how to use the lathe. I've now turned 30-40 pens of all types, giving them as Christmas presents to many family members and friends this year. The photo below shows the machine set up with wood blocks ready for turning into a Slimline pen.

The process is fairly simple. I select a chisel and with the lathe turning at about 1400 rpm I round off the blank, working in from the ends. Once it's round, I can cut more aggressively to narrow the blocks to closer to their final size. After that, I begin to shape the wood to the configuration I want. In the case of the Slimline pen, I want it to be voluptuously curved in shape, coming to its narrowest points at each end and in the middle, where a ring will be attached during the final assembly. Once fully shaped and sized, I sand in ascending grits from 150 to 600, then polish with EEE cream before applying friction polish for the final coat. It takes only a few minutes to shape a pen and I find it to be good therapy.

Kits for pens and pencils, as well as wood and acrylic blanks, come in a variety of sizes and are available from a number of sources, including Woodcraft. So far I've concentrated on the Slimline and Wall Street II models so there are many more for me to explore.

I'm planning on selling my pens at some point, perhaps on the Web, and at craft shows with a friend. But before I can do that, I'll have to build up a large enough stock to merit the effort. Sounds like I need to spend more time in the woodshop!

Norm