Turning Pens and Making Small Crafts

My friend Jeff Fleisher and I signed up to sell our wares at two craft shows this fall.  Both are at the Fairfax County (Virginia) Government Center.  Ever since I completed the Winchester desk class in July and a subsequent vacation, I have been almost totally occupied with turning pens.  That will be, for the most part, what I'll be selling.

I decided to concentrate on turning wood rather than acrylic.  So to make them better than ho-hum, I've been working with burls--especially elder but also buckeye--which give the pens a more distinguished look.  I've got a pretty good stock of pens that will retail in a range from inexpensive to expensive.

But after more than a month of turning pens, I'm getting worn out and so have turned to making business card holders and small clocks.  The business card holders are surprisingly easy to make.  You take an approximately 2X2 board (I used cherry and walnut) and cut out the inside with a dado blade, making several passes until I got the right depth.  Then I took the length of wood to the router table and routed a shallow groove 1/4 inch wide in the face.  I glued a strip of 1/4 inch patterned inlay into the groove, then sanded the boards before cutting them into 3 inch lengths.  They look pretty good!

The clocks are only just started.  Guess I'd better get busy!

Norm

Winchester Secretary -- And So It Begins

I reported last year that I would be building a Winchester secretary in the Chippendale style, taking a class with Jeff Headley and Steve Hamilton.  Jeff and Steve are renowned furnituremakers.  They produced the two matching chairs with carved handles that the President and foreign heads of state occupy during one-on-one discussions, as well as reproduction pieces for Colonial Williamsburg and others.  It's a seven-day class in two segments.  In the first segment, which began yesterday, we will be building the outer, dovetailed case.  In July, we'll conclude with two days when we will start work on the interior.  In between times and afterward, we'll work on the desk in our own shops.

In reality, I began working on the secretary late last year.  I first created parts and cut lists using Cut List Plus.  Then I located sources for the cherry and poplar I'm using and began accumulating the lumber.  The hardest part was finding a good supply of curly cherry and getting it in the 5/4 size (1-1/4") needed to assure it would be 7/8" thick after planing.  In the end, I settled for 4/4 (1") stock in many instances and hoped for the best.  Then came weeks of cutting the wood to rough dimensions and gluing up the many panels.  With all that behind me, I am now starting the actual construction of the desk.

The design for the secretary is based on a Winchester area desk that is held in the Williamsburg collection.  It is described and illustrated in an article by Anne S. McPherson, "Adaptation and Reinterpretation: The Transfer of Furniture Styles from Philadelphia to Winchester to Tennessee," pp. 299-334 in Luke Beckerdite, ed., American Furniture 1997 (Hanover and London: Chipstone Foundation, 1997).  The original included a case on top that might have held books or china.  I will be building my desk without that top.

We spent most of the first morning running our panels through a 36" belt sander to get them even and to the correct thickness, then cutting them to size.  The machine work was done by our instructors, who cut all the panels using a crosscut sled and jigs so they would all be equal in size.  This was much faster and saved our time for the real work, cutting the dovetails that will hold the case together.

The afternoon was spent cutting half-blind dovetails in the case bottom and sides.  This was my first time to cut dovetails and my first time for half-blind dovetails, even in practice.  It went well.  Fortunately, the dovetails will all be hidden inside the case so any mistakes will not be visible from the outside.  So it provided me a good opportunity for practice.

Of course, with all my careful preparations to process and load the lumber and tools in my car, I walked off without my chisels and dovetail saw.  I had visited my friend Jeff Fleisher to get some dovetailing advice and took them with me, then left them in my wife Betsy's car. Fortunately, I was able to borrow tools from the instructors and all went well.  Still, I wanted to give my Blue Spruce chisels a good workout and was disappointed not to have them.  They are already loaded in the car so I'll have them today.

When we resume this morning, I'll mark and cut the remaining set of dovetails on the bottom of the case and then we'll turn our attention to the top of the case.  I find I'm enjoying chopping dovetails and, under the watchful eye of the instructors, I'm learning a lot.  It'll be fun seeing how far we get today.

Oh, and I've concluded that my plywood-topped workbench is not going to cut it for dovetailing so a new bench is in order for later this summer.  One thing I know for sure--it'll have a hard maple top.  Other than that, I've ordered Christopher Schwarz's book Workbenches, said to be the best source on designing and building one.  In addition, I've found an on-line source at Fine Woodworking for a good looking bench that uses the same vise I have sitting on my workshop floor.

More later.

Norm

Buying Curly Cherry

Jeff Fleisher and I made a trip the other day to Willow Run lumber yard in Harrisonburg, VA, in the Shenandoah Valley. He was looking at some highly figured walnut boards as a possibility for the Winchester desk he will be making in the class we are taking. I wanted to look at curly cherry. Jeff drove us from his place in New Market in his bright yellow pickup truck with the license plate BMBL BEE. Willow Run is just a half hour from his place.

The walnut boards Jeff was looking at were matched, cut from the same log, and had a beautiful figure to them. But Jeff isn't certain yet whether he is going to use solid wood or veneer his desk. He said there is some really pretty veneer available and he might use that.

I pawed my way through a large bin of curly cherry and after that another pallet of it. There was a lot to look at, mostly 8-10 foot boards. I pulled out a dozen and took them for the outside of the case. Some of the boards are shown in the picture. Only one was what I would call spectacular and I could not find a matched set to use for the four drawers, which I would like to have the same pattern to them. I'm going to look elsewhere for four boards cut successively from the same log and that have a special curly figure to them.

When we got back to Jeff's place, I tied the load to the top of my Subaru and away I went up I-81 to I-66 and back home. The boards rode well.

When I got home, I put them inside on a shelf I had cleared, stickering them between small lengths of thin board to allow them to acclimate to the humidity level in my basement shop. In a couple of weeks, I'll begin crosscutting them to rough length after marking them up for the parts they will make up. I'll talk more about that process as I get into it.

For the rest of the cherry, I may have to make a trip into Pennsylvania. There are some good lumber companies there that have Pennsylvania cherry I may be able to use for the drawer fronts and slant front and writing surface of the desk.

More later.

Norm

Preparing to Build the Winchester Chippendale Desk

Recently, I've turned my attention to preparing to build the Valley of Virginia Chippendale desk I wrote about previously. I'm taking the class in June and July from Jeff Headley and Steve Hamilton, who teach at the Woodworking Workshops of the Shenandoah Valley, located in Berryville, not far from me.

The first task was to estimate the lumber I will need to build this desk. I'm going to use cherry for the casework and will probably use curly cherry for the drawer fronts and lid. The drawer sides and bottoms and other interior parts will be poplar. I happened upon a program called CutList Plus, where you enter the dimensions and type of wood for each part. The program then calculates layouts on the boards I'll be using and from that I'm able to estimate the amount of lumber I need to buy.

I hauled in a first load of poplar the other day and have it on the lumber rack and stickered. It should be ready to begin processing in a couple of weeks. Tomorrow I'll call some hardwood suppliers in the region to see if they have curly cherry in stock. My plan is to check it out in the next couple of weeks so it too can be acclimating to my workshop humidity level.

Although the course does not start until June, I'm counting on it taking me weeks to joint, plane and cut to size all the pieces for the desk. This all has to be completed before the class begins. I've put together a schedule that will allow me to do all this without rushing and so far I am on or slightly ahead of schedule. But I'll have to be diligent in order to keep it that way.

In addition to preparing the wood, I'll need to learn some new skills. The case is constructed with hand cut dovetails, so I'll need to learn how to cut these before the class starts. I've never yet cut one. And, some of the pieces of the cherry will need to be hand planed because of their size and in order to avoid tearout. I've purchased a good set of Blue Spruce chisels and several Lie-Nielsen and Veritas planes, so I have the tools in hand. Now I need to learn how to use them well.

I'll be updating my progress as I go along on this ambitious project.

Norm